
Water Metering & Leak Detection
12VDC Powered Water Meter
- Modbus
- DC
- Both
Mains-connected 12VDC water meter with LORAWAN interface for integration with building management systems.
Specifications
| Technology | Mechanical / Magnetic |
|---|---|
| Power | 12VDC |
| Flow Range | 0.03–30 m³/h |
| Accuracy | Class C (±1%) |
| Pipe Size | DN15–DN100 |
| Protection | IP65 |
| Certifications | CE, MID |
| Communication | LoRaWAN / nbIoT |
Specifications may vary by model and region. Final selection is confirmed during solution design.
Applications
Where the 12VDC Powered Water Meter is used
Water metering and leak detection pay back faster than almost any other building IoT use case: one undetected riser leak or overflowing tank can cost more than the whole monitoring system.
- Bulk and tenant water submetering
- Leak detection under sinks, in plant rooms, risers and ceiling voids
- Tank level monitoring with high and low alarms
- Pump run status and dry-run protection alerts
- Irrigation metering and night-flow analysis to find hidden leaks
How it connects
The 12VDC Powered Water Meter communicates over Modbus RTU. It can be wired into an existing BMS or SCADA, or connected wirelessly by pairing it with a Modbus-to-LoRaWAN converter that polls its registers and sends them over LoRaWAN, which avoids new data cabling.
Installation notes for UAE projects
- Battery-powered meters and leak sensors suit locations with no power, such as risers and ceiling voids.
- Water meter chambers and basements are difficult RF locations; antenna position is checked during the site survey.
- Leak alarms can create work orders automatically in your CAFM, so a technician is dispatched within minutes.
- Pulse-output meters can be retrofitted with a LoRaWAN pulse counter instead of being replaced.
FAQ
Water Metering & Leak Detection — questions
How long do battery-powered water sensors last?
Battery life depends on reporting interval, radio conditions and alarm frequency. Many devices are specified for several years at typical intervals; we size intervals to meet your maintenance cycle.
Can leak alarms trigger a work order?
Yes. Alarms can be sent to a CAFM or CMMS through its API so a work order is created automatically and tracked to closure.
Can existing water meters be connected?
Meters with pulse, Modbus or M-Bus outputs can usually be connected through the matching LoRaWAN converter without replacement.
Used in
Solutions using this device
Selecting devices for a project?
Tell us about your site, assets and existing systems. A LoRaWAN specialist will review your requirements and propose a practical architecture — no obligation.


