Design/Connect/Integrate/Deploy
Complete LoRaWAN & LPWAN IoT Solutions
From device selection and network architecture to protocol integration, IoT platforms and deployment — MatrixAI helps organisations across the UAE and GCC connect, monitor and optimise their infrastructure.
- Protocols integrated
- 11+
- Protocols integrated
- Solution verticals
- 7
- Solution verticals
- Architecture → support
- End-to-end
- Architecture → support
- LoRaWAN
- LPWAN
- LoRa Mesh
- Modbus
- BACnet
- M-Bus
- MQTT
- RS485
- BMS
- CAFM
- Energy
- Water
What we do
One engineering partner from architecture to long-term support
MatrixAI LoRaWAN is a B2B IoT solutions engineering company — not a box reseller. We take responsibility for the complete chain: devices, connectivity, protocol integration, data and deployment.
- 01
Consult & Architect
Requirements, RF/site assessment, device and gateway selection, network and integration architecture.
- 02
Connect & Integrate
Protocol conversion from Modbus, BACnet, M-Bus and I/O to LoRaWAN, and data delivery to BMS, CAFM and platforms.
- 03
Deploy & Commission
Installation supervision, gateway deployment, device provisioning, testing and handover documentation.
- 04
Support & Scale
Network monitoring, troubleshooting, multi-site roll-out and dedicated IoT engineering teams.
Solutions
IoT solutions for buildings, utilities, industry and cities
Each solution combines the right sensors, connectivity and integration for the outcome you need.
Energy & Water Management
Most buildings and facilities still read meters manually, discover leaks from the water bill and see energy waste only at month-end.
Learn moreSmart Buildings & Facilities Management
Facilities teams are measured on uptime, response time and cost — yet most building assets are invisible between PPM visits.
Learn moreIndustrial IoT
Industrial sites are full of capable machines that simply are not connected.
Learn moreCondition Monitoring
Rotating equipment rarely fails without warning — vibration, temperature and noise change weeks before a breakdown.
Learn moreEnvironmental Monitoring
Air quality, comfort and noise affect health, productivity and compliance.
Learn moreSmart Waste Management
Fixed collection schedules mean overflowing bins in some locations and wasted trips to empty ones in others.
Learn moreSmart City & Utilities
Municipalities, master developers and utilities need one resilient wireless layer for many applications.
Learn moreIoT Engineering & Technical Teams
You bring the project. We provide the IoT engineering capability.
Protocol conversion & integration
Connect the equipment you already have
Protocol conversion is a core MatrixAI capability. We bring Modbus, BACnet, M-Bus, RS485, pulse, analog and digital I/O onto LoRaWAN — and deliver the data to your BMS, CAFM, SCADA or platform, in both directions where appropriate.
Compatibility is project-dependent where vendor-specific profiles, certification, timing or security details affect integration — we validate every device type during design.
MatrixAI Gateway / Converter
Polling · Mapping · Decoding · Downlink
Delivered to
- IoT Platform
- BMS
- CAFM / CMMS
- SCADA
- Cloud & BI
via MQTT · REST · BACnet · Modbus TCP · OPC UA
Energy & water management
Measure → Connect → Analyse → Detect → Control → Optimise
Electricity submetering, BTU and chilled-water monitoring, tenant energy, water metering, tank levels, pumps and leak detection — connected wirelessly and turned into savings.
- 01
Meters & Sensors
Electricity · BTU · Water · Level
- 02
LoRaWAN / LoRa Mesh
Wireless last mile
- 03
Gateway
4G / Ethernet backhaul
- 04
Network Server
e.g. ChirpStack
- 05
IoT Platform
Decoding & storage
- 06
Analytics
Dashboards · Alerts
- 07
BMS / CAFM / Actions
Work orders · Control
Energy
- Electricity submetering (single & three phase, DIN rail, panel, CT-based)
- HVAC and major equipment energy
- BTU / chilled-water energy monitoring
- Tenant and cost-centre energy allocation
- Solar PV generation monitoring
- Maximum demand monitoring
- Consumption anomaly detection
- Energy dashboards and saving opportunities
Water
- Bulk and tenant water metering
- Tank level monitoring
- Pump status and run-hour monitoring
- Leak detection (spot, zone and continuous-flow)
- Flow and pressure monitoring
- Irrigation metering
- Water balance and non-revenue water analysis
- Alerts and remote valve control
Smart buildings & facilities management
Alarms that become work orders
Facilities teams are measured on uptime, response time and cost — yet most building assets are invisible between PPM visits. MatrixAI adds wireless monitoring to existing buildings and connects it to the BMS and CAFM, so that alarms become work orders and maintenance becomes condition-based.
- Energy and water monitoring
- HVAC monitoring and control
- Indoor air quality (CO₂, PM2.5, TVOC, temperature, humidity)
- Water leakage, tank and pump monitoring
- Asset condition monitoring
- Occupancy and environmental sensing
- BMS integration (BACnet, Modbus)
- CAFM / CMMS integration
Example workflow · IoT-triggered CAFM
- 1Leak AlertSensor detects water
- 2IoT PlatformRules & escalation
- 3CAFM Work OrderAuto-created via API
- 4TechnicianMobile notification
- 5RepairEvidence captured
- 6ClosureKPIs & SLA tracked
LoRaWAN & LPWAN infrastructure
Reliable wireless networks, engineered — not guessed
From RF/site assessment and gateway placement to private LoRaWAN network servers such as ChirpStack, backhaul and multi-site architecture.
- 01
Sensors & Meters
Class A / C devices
- 02
Gateways
Indoor · Outdoor
- 03
Network Server
Private · ChirpStack
- 04
MQTT / API
Decoded data
- 05
Applications
BMS · CAFM · Analytics
LoRaWAN network design & deployment
RF assessment, gateway selection and placement, private LoRaWAN, provisioning, backhaul and support.
Learn moreLoRa Mesh for difficult RF
Hybrid Mesh → Gateway → LoRaWAN/IP architecture for basements, plant rooms, warehouses and dense indoor sites.
Learn moreLoRaWAN across the UAE & GCC
Local engineering from Sharjah for projects in Dubai, Abu Dhabi, the Northern Emirates and the wider GCC.
Learn moreProducts & devices
Field-proven devices for every layer
Energy, water and BTU meters, HVAC and IAQ sensors, thermostats, protocol converters, gateways, streetlight and waste devices.
ModbusEnergy Meters
Single Phase DIN Rail Energy Meter
LoRaWANEnergy Meters
Three Phase LoRaWAN DIN Rail Energy Meter
LoRaWANWater Metering & Leak Detection
Battery Operated Water Meter
LoRaWANSmart Thermostats
Touchscreen LoRaWAN Smart Thermostat
LoRaWANAir Quality Sensors
3-in-1 Indoor Air Quality Sensor
LoRaWANStreetlight Controllers
Single Pole LoRaWAN Controller
LoRaWANHVAC & Building Sensors
Duct Temp & Humidity Sensor (LoRaWAN)
BACnetHVAC & Building Sensors
Edge Controllers
Case studies
How our architectures work in the field
Challenge, existing systems, architecture, devices, connectivity and integration — documented for every project type.
Property management · UAE
Wireless energy & water submetering for a mixed-use portfolio
Retrofitting existing Modbus energy meters and pulse water meters in occupied towers to deliver tenant-level interval data.
Learn moreFacilities management · UAE
Leak detection with automatic CAFM work orders for an FM provider
Wireless leak, tank-level and pump monitoring connected to the FM provider's CAFM so that alarms become work orders.
Learn moreSmart buildings / District cooling · GCC
Condition monitoring of pumps and AHUs in central plant rooms
Vibration and temperature monitoring of critical rotating equipment to move from time-based to condition-based maintenance.
Learn moreSmart city · UAE
Shared LoRaWAN network for smart waste and streetlights in a master community
One private LoRaWAN network serving waste bins, streetlights and outdoor air-quality stations for a master community.
Learn moreWhy MatrixAI
Hardware, software and field engineering under one roof
We connect existing and new equipment, build reliable wireless infrastructure and integrate data with BMS, CAFM and enterprise systems — then stay to support and scale it.
Multi-protocol IoT expertise
LoRaWAN, LoRa Mesh, Modbus, BACnet, M-Bus, MQTT, OPC UA and more — in one team.
Hardware + software capability
Devices, converters and gateways, plus firmware, decoders, APIs and platforms.
Smart building & FM knowledge
We understand BMS, CAFM, PPM and how FM teams actually operate.
Energy & water management
Submetering, BTU, leak detection and water balance are core verticals, not add-ons.
Protocol conversion & integration
Existing equipment connected without unnecessary replacement.
IoT product engineering
Embedded, firmware and hardware engineering for custom requirements.
Deployment & commissioning
Field engineers for installation supervision, provisioning and testing.
Technical teams & long-term support
Dedicated engineers and ongoing network support as you scale.
Industries
Built for the organisations that run infrastructure
Resources
Architecture guides & protocol notes
Architecture guide · 8 min
What is LoRaWAN? A Practical Guide for Buildings, Utilities and Industry
LoRa, LoRaWAN, gateways, network servers and device classes explained, with a clear view of where LoRaWAN fits and where it does not.
Learn moreProtocol note · 7 min
Modbus to LoRaWAN: How to Connect Existing Meters and Controllers Wirelessly
Register maps, polling strategy, payload size and downlink writes — the details that decide whether a Modbus-to-LoRaWAN retrofit works.
Learn moreTechnical article · 6 min
LoRaWAN vs NB-IoT vs Wi-Fi vs Zigbee for Building and Utility IoT
There is no universal best network. Here is how LoRaWAN compares with NB-IoT, Wi-Fi and Zigbee for real building and utility projects.
Learn moreWhat does a LoRaWAN solutions company do?
A LoRaWAN solutions company designs and delivers complete wireless IoT systems: selecting sensors and gateways, planning RF coverage, configuring the network server, integrating data with platforms such as BMS, CAFM or SCADA, and deploying and supporting the network. MatrixAI provides this end-to-end service in the UAE and GCC.
Can MatrixAI connect our existing Modbus, BACnet or M-Bus equipment to LoRaWAN?
Yes. Protocol conversion is a core capability. We use Modbus-to-LoRaWAN, BACnet-to-LoRaWAN, M-Bus-to-LoRaWAN, pulse, analog and digital I/O converters so existing meters and equipment can be monitored wirelessly without replacement. Compatibility is validated per device model.
Do you deploy private LoRaWAN networks?
Yes. We design and deploy private LoRaWAN networks including gateway selection and placement, 4G/Ethernet backhaul and network servers such as ChirpStack, hosted on-premise or in the cloud.
Which areas do you cover?
We are based in Block B, Innovation Park, Sharjah, and deliver projects across the UAE — Dubai, Abu Dhabi, Sharjah and the Northern Emirates — and the wider GCC.
How do we start a project?
Send us a project enquiry with your site, assets and existing systems. A LoRaWAN specialist will review it, usually recommend an RF/site assessment or pilot, and propose a solution architecture.
Have an IoT project in mind?
Tell us about your site, assets and existing systems. A LoRaWAN specialist will review your requirements and propose a practical architecture — no obligation.