Skip to content
MatrixAILORAWAN
Duct Temp & Humidity Sensor (LoRaWAN) — LoRaWAN HVAC & Building Sensors

HVAC & Building Sensors

Duct Temp & Humidity Sensor (LoRaWAN)

  • LoRaWAN
  • DC
  • Indoor

Duct-mount temperature and humidity sensor with LoRaWAN for HVAC system monitoring and ventilation control in commercial buildings.

Specifications

Temp Range-20°C to +70°C
Humidity0–100% RH
Accuracy (Temp)±0.3°C
Accuracy (RH)±2%
CommunicationLoRaWAN
Probe Length160 mm
Power12–24VDC
CertificationsCE, RoHS

Specifications may vary by model and region. Final selection is confirmed during solution design.

Applications

Where the Duct Temp & Humidity Sensor (LoRaWAN) is used

HVAC and building sensors give FM teams visibility of air handling, ducts, valves and plant between maintenance visits, and let control strategies run on real measurements.

  • Duct temperature, humidity and CO₂ monitoring on AHUs
  • Filter condition alerts from differential pressure
  • Chilled-water valve control and actuator feedback
  • Digital and analog I/O for legacy equipment status and alarms
  • Edge controllers bridging field devices to BACnet, Modbus or MQTT

How it connects

The Duct Temp & Humidity Sensor (LoRaWAN) is a native LoRaWAN device. It joins any standard LoRaWAN network through a gateway and a network server such as ChirpStack, using the EU868 frequency plan commonly used in the UAE. Its uplinks are decoded on the network server and delivered to your platform, BMS or CAFM over MQTT or REST.

LoRaWAN network design →

Installation notes for UAE projects

  • BACnet and Modbus devices are mapped into the existing BMS object list so operators keep their familiar interface.
  • Where cabling is impractical, I/O signals can be carried over LoRaWAN with a converter.
  • Plant rooms are often RF-difficult; LoRa Mesh or an in-room gateway can be used.

FAQ

HVAC & Building Sensors — questions

Will these devices work with our existing BMS?

Devices with BACnet or Modbus interfaces integrate directly. LoRaWAN devices are integrated through a network server and a BACnet or Modbus mapping layer.

Can legacy plant with only dry contacts be monitored?

Yes. Digital and analog input devices read run status, alarms and 4–20 mA or 0–10 V signals and report them wirelessly.

Selecting devices for a project?

Tell us about your site, assets and existing systems. A LoRaWAN specialist will review your requirements and propose a practical architecture — no obligation.