Skip to content
MatrixAILORAWAN
Differential Pressure Sensor — Modbus HVAC & Building Sensors

HVAC & Building Sensors

Differential Pressure Sensor

  • Modbus
  • AC
  • Indoor

High-accuracy differential pressure transmitter for HVAC duct pressure monitoring, filter status detection, and airflow measurement.

Specifications

Range0–500 Pa (selectable)
Accuracy±1% FS
Output4–20mA / 0–10V / Modbus
ConnectionPush-in fittings 6 mm
Power24VAC/DC
DisplayOptional LCD
ProtectionIP54
CertificationsCE

Specifications may vary by model and region. Final selection is confirmed during solution design.

Applications

Where the Differential Pressure Sensor is used

HVAC and building sensors give FM teams visibility of air handling, ducts, valves and plant between maintenance visits, and let control strategies run on real measurements.

  • Duct temperature, humidity and CO₂ monitoring on AHUs
  • Filter condition alerts from differential pressure
  • Chilled-water valve control and actuator feedback
  • Digital and analog I/O for legacy equipment status and alarms
  • Edge controllers bridging field devices to BACnet, Modbus or MQTT

How it connects

The Differential Pressure Sensor communicates over Modbus RTU. It can be wired into an existing BMS or SCADA, or connected wirelessly by pairing it with a Modbus-to-LoRaWAN converter that polls its registers and sends them over LoRaWAN, which avoids new data cabling.

Modbus to LoRaWAN integration →

Installation notes for UAE projects

  • BACnet and Modbus devices are mapped into the existing BMS object list so operators keep their familiar interface.
  • Where cabling is impractical, I/O signals can be carried over LoRaWAN with a converter.
  • Plant rooms are often RF-difficult; LoRa Mesh or an in-room gateway can be used.

FAQ

HVAC & Building Sensors — questions

Will these devices work with our existing BMS?

Devices with BACnet or Modbus interfaces integrate directly. LoRaWAN devices are integrated through a network server and a BACnet or Modbus mapping layer.

Can legacy plant with only dry contacts be monitored?

Yes. Digital and analog input devices read run status, alarms and 4–20 mA or 0–10 V signals and report them wirelessly.

Selecting devices for a project?

Tell us about your site, assets and existing systems. A LoRaWAN specialist will review your requirements and propose a practical architecture — no obligation.